Dishlex DX301SK User Manual download pdf (Page 11)

Select and start a washing program

Set the washing program with the door ajar.

The washing program only starts after you close

the door. Until then it is possible to modify the set-

tings.

1. Press the on/off button.

2. Make sure that the appliance is in setting mode.

3. Press one of the program buttons. Refer to the

'Washing programs' chart for program details.

– The program indicator light comes on.

– The Washing indicator light comes on.

– The flashing digital display shows the program

duration.

4. Close the door.

– The washing program starts automatically.

– The program indicator light and the Washing

indicator light stay on.

When the washing program operates, you can-

not change the program. Cancel the washing

program. Refer to 'Cancelling a washing program'.

Select and start a washing program with

delay start

1. Press the on/off button.

2. Set a washing program.

3. Press the delay start button until the display

shows the necessary delay start of the washing

program.

4. Close the door.

– The countdown starts. The display shows re-

maining time to the start of the washing pro-

gram.

– When the countdown is completed, the wash-

ing program starts automatically.

With the delay start function set, the Washing

indicator light goes off. Once the countdown of

the delay start has ended, the washing program will

start automatically and the Washing indicator light

comes on.

If you open the door during the countdown, this

will interrupt the countdown. When you close

the door again, the countdown continues from the

point of interruption.

Cancelling delay start

1. Press and hold, approximately for 3 seconds, the

two buttons above the word Cancel until all the

program lights come on.

– When you cancel delay start, you also cancel

the washing program.

2. Set a new washing program.

Warning! Only interrupt or cancel a washing

program if necessary. Open the door carefully.

Hot steam and water can escape.

Interrupting a washing program

1. Open the appliance door. The washing program

stops.

2. Close the appliance door. The washing program

continues from the point of interruption.

Cancelling a washing program

1. Press and hold, approximately for 3 seconds, the

two buttons above the word Cancel until all the

program lights come on.

2. Release the two buttons, the washing program

has been cancelled.

At this point, you can follow these steps:

1. Switch off the appliance.

2. set a new washing program.

Fill the detergent dispenser with detergent before you

set a new washing program.

End of the washing program

The washing program is complete when:

• The display shows 0.

• The Finished indicator comes on.

1. Switch off the appliance.

2. Open the door.

– For better drying results, keep the door ajar for

some minutes before you remove the dishes.

Let the dishes cool down before you remove them

from the appliance. Hot dishes are easily damaged.

Removing the load

• First remove items from the lower basket, then

from the upper basket.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Comments to this Manuals

No comments

Dishlex DX301SK User Manual Page 11

Comments to this Manuals

Related products and manuals for Dishwashers Dishlex DX301SK