Dishlex DSF6306X User Manual

DSF6306XUser ManualENDishwasher

Option Delaymax.1. Set the program.2. Press Delay until the display shows the delay time you want to set.3. Close the appliance door, the countdown st

5 min Press the on/off button to deactivate the appliance. If you don't press the on/off button, the Auto Off functionautomatically deactivates t

• The correct quantity of detergent is used.Unloading the baskets1. Let the tableware cool down before you remove itfrom the appliance. Hot items can

TroubleshootingIf the appliance does not start or it stops duringoperation. Before you contact an Authorised ServiceCentre, check if you can solve the

Problem Possible solutionThe dishes are wet.• The program does not have a drying phase or has a drying phase withlow temperature.• The rinse aid dispe

future reference should you require service for yourAppliance.1. In this warranty:a) ‘acceptable quality’ as referred to in clause 10of this warranty

10. For Appliances and services provided by Electroluxin Australia, the Appliances come with a guaranteeby Electrolux that cannot be excluded under th

17

18

19

ContentsSafety information 2Safety instructions 3Control panel 5Programs 5Settings 6Before first use 8Daily use8Hints and tips 11Care and cleaning 12T

www.dishlex.com.au156928290-A-012018

– by clients in hotels, motels, bed & breakfast and other residential typeenvironments.• Do not change the specification of this appliance.• The o

• Connect the mains plug to the mains socket only atthe end of the installation. Make sure that there isaccess to the mains plug after the installatio

Control panel213451On/off button2Display3Indicators4Delay button5Program buttonsIndicatorsIndicator DescriptionEnd indicator.Multitab indicator.Rinse

Program Degree of soilType of loadProgram phases Consumption values1)Duration(min)Energy(kWh)Water(l)3)AllCrockery, cut-lery, pots andpans• Prewash• W

The appliance is in Program selection mode when all the program indicators come on and the display shows 2horizontal status bars.When the appliance is

Before first use1. Fill the rinse aid dispenser.2. Open the water tap.3. Start a program to remove any processingresiduals that can still be inside th

Adding multi-tablets21The Auto Off functionThis function decreases energy consumption by deactivating automatically the appliance when it is not opera