Dishlex DX203SK User Manual

User manualDishwasherDX 203

3To remove filters B andC, turn the handle ap-proximately 1/4 anti-clockwise.4Remove the flat filter Afrom the bottom of the ap-pliance.5Put the filte

Fault code and malfunction Possible cause and solution• The running program light continuesto flash• The 'Finished' indicator light flasheso

The cleaning results are not satisfactoryThe dishes are wet and dull • No rinse aid has been used.• The rinse aid dispenser is empty.There are streaks

InstallationFitting under a counterWarning! Make sure that mains plug isdisconnected from the mains socket duringinstallation.Put the appliance adjac

The water pressure must be in the limits (refer to 'Tech-nical data'). Make sure that the local water authoritygives you the average mains p

The mains plug must be accessible after theappliance has been installed.Never unplug the appliance by pulling on the cable.Always pull the plug.Test t

WarrantyFOR SALES IN AUSTRALIA AND NEW ZEALANDThis document sets out the terms and conditionsof product warranties for Electrolux branded ap-pliances.

9. This warranty, the contract to which it relatesand the relationship between you and Electroluxare governed by the law applicable in the Austral-ian

18

19

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Washing programmes _ _ _ _ _ _

www.electrolux.com/shop 156989324-A-052008

• A qualified and competent person must do the elec-trical installation.• A qualified and competent person must do theplumbing installation.• Do not c

Button LockThe Button Lock function locks all buttons on the con-trol panel while the washing program is in operation.The Button Lock function can be

Program Degree of soil Type of load Program descriptionRinse & Hold Any Partial load (to becompleted later in theday).1 cold rinse (to prevent foo

345Fill when the rinse aid in-dicator (B) becomesclear.Caution! Do not fill the rinse aid dispenser withother products (e.g. dishwasher cleaning agen

12Use the cutlery grid for best washing results. If the di-mensions of the cutlery prevent use of the cutlerygrid, remove it.1Arrange the items to let

3Fill the detergent dis-penser (A) with deter-gent.4If you use a washing pro-gram with prewashphase, put more deter-gent in the prewash de-tergent com

Fill the detergent dispenser with detergent before youset a new washing program.Select and start a washing program withdelay start1. Press the on/off