Dishlex DX103SK User Manual

User manualDishwasherDX 103

Fault code and malfunction Possible cause and solution• continuous flash of the start/cancel in-dicator light• 1 flash of the 'Finished' ind

The cleaning results are not satisfactoryThere are streaks, milky spots ora bluish coating on glasses anddishes• Decrease the rinse aid dosage.Dry wat

1 234Adjusting the level of the applianceMake sure that the appliance is level to close and sealthe door correctly. If the level of the appliance is c

Remove the sink plug when the appliance drains thewater to prevent that the water goes back into the appli-ance.If you connect the water drain hose to

e) ‘Electrolux’ means Electrolux Home ProductsPty Ltd of 163 O’Riordan Street, Mascot, NSW2020, ABN 51 004 762 341 in respect of Appli-ances purchased

loss or damage whether direct or indirect arisingfrom your purchase, use or non use of the Appli-ance.10. For Appliances and services provided by Elec

www.electrolux.com/shop 156962051-A-132013

ContentsSafety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Washing programmes _ _ _ _

• Keep all the packaging away from children. There isa risk of suffocation.• Keep all detergents in a safe area. Do not let childrentouch the detergen

Washing programmesProgram Degree of soil Type of load Program descriptionPots Heavy soil Crockery, cutlery, potsand pansPrewashMain wash up to 70°C2 i

3. Set the correct washing program for the type ofload and soil.4. Fill the detergent dispenser with the correct quanti-ty of detergent.5. Start the w

– Put small objects in the cutlery basket.• Plastic items and pans with non-stick coatings canretain water droplets. Plastic items do not dry as wella

Caution! If the basket is in the upper position, donot put cups on the cup racks.Use of detergentOnly use detergents (powder, liquid or tablet) thatar

When the washing program operates, you cannotchange the program. Cancel the washing pro-gram.Warning! Only interrupt or cancel a washingprogram if nec

5Put the filter A in the bot-tom of the appliance. In-stall the flat filter correctlyunder the two guides D.6Put the filter system in po-sition. To lo